Athmed & Aesmed - Professional beauty machine manufacturer since 2009.
info@aesmedlaser.com

Hifu

You’re in the right place for Hifu.By now you already know that, whatever you are looking for, you’re sure to find it on Athmed & Aesmed.we guarantee that it’s here on Athmed & Aesmed.
exceed other similar products with its design. .
We aim to provide the highest quality Hifu.for our long-term customers and we will actively cooperate with our customers to offer effective solutions and cost benefits.
  • High Quality 4D Hifu 12 lines HIFU Face Lifting and Anti Wrinkle Device Machine
    High Quality 4D Hifu 12 lines HIFU Face Lifting and Anti Wrinkle Device Machine
    Technical advantages1, two modes: can switch between fast mode or slow mode.2. Up to 11 lines can be played in one shot, and the maximum energy area width is 10mm. The corresponding parameters can be adjusted according to the size of the skin area, the operation time is greatly shortened, the energy point of the skin is more uniform, and the curative effect is better.3, using the most advanced high-tech technology, according to the facial skin condition equipped with two treatment heads, the precise effect of different skin depth, the energy of treatment over the epidermis, 100% without any damage.At the same time, the depth of the skin treated by the treatment head is consistent with the set value, ensuring the customer's painless and comfortable.4, the thermal effect of dermal collagen and collagen fibers at the same time on the fat layer and fascia layer (SMAS) have thermal stimulation, the treatment effect is far better than the hot Maggie.5, the operation is simple and convenient. No need for consumables, which greatly saves on treatment costs.6. Immediately after treatment, the effect of tightening and shaping can be seen. A treatment can be maintained for at least 18--24 months, and the skin age is negatively increased every year.7. Apply makeup immediately after treatment, without affecting normal life and work.
  • Aesmed Athmed HIEMT Reduce fat and increase muscle body shaping slimming machine
    Aesmed Athmed HIEMT Reduce fat and increase muscle body shaping slimming machine
    Aesmed Athmed HIEMT Reduce fat and increase muscle body shaping slimming machine
  • Professional V8c1 manufacturers
    Professional V8c1 manufacturers
    Professional V8c1 manufacturers
  • Professional Professional IPL hair removal machine  AM-K3 manufacturers manufacturers
    Professional Professional IPL hair removal machine AM-K3 manufacturers manufacturers
    Working principle:Light-heat effect: Heat energy from intense pulsed light will be transmited through hair body to its bottom. The fast rising high temperature helps to destroy the hair bottom to make hair removal forever.On-Motion Energy stacking technology: Sliding the handpiece during treatment, the energy is uniformly distributed to make people feel comfortable and save treatment time. FHR combines high average power, low fluence, and a high repetition; gradually increasing the temperature of the hair follicle by stacking the energy. Application:Fast hair removal , Fast skin Rejuvenation , Pigmentation removal Vascular removal Advantages:1.New designed handpiece, with spot size: 15*50mm2; 10*50mm2;and 10*15mm2. Two handles are as the standard configurartion. Extra cost will occur for any more.2. IPL power with 2000W, Total 2500 W power supply , More powerful energy generating system .3. Touch LCD screen with 10.4". More online self checking system to ensure the safety.4.Water cooling + Fans cooling + Semi conductor cooling systems! No need to stop the machine after working for hours. very comfortable customer treatment experience .5. Bigger pump to have bigger water flow and reduce lamp temperature more effectively;6. Frequency is 1~10Hz. So 10pulses / second maximumly 7. Imported Xneon lamp according to strict test;8. 500,000 effective shots warranty Feature:1、More longer life-span of LampThere are 2 ways for extending lamp life:1)Improve the chamber reflectivityAdopting silver for the reflection film because silver have more higher reflectivity than gold at the spectrum of 600-1200nm;Imported lamp installed is more steady and more higher electric-photo conversion rate than than other local ones.2)Improve lamp cooling. In the system water is the first cooling medium of lamp. So the water flow is very important for heat radiation. Now in the market, most of IPL system is less than 2.0L/min, but our SHR is improved to almost 2.5 times. Then the life of lamp is greatly extended. 1.5M shots have been reported by clients (but 300K shots/1 year for warranty).2、More safety1) On SHR mode, energy density which you could select on the screen is calibrated by the imported IPL energy meter. The date is showing the reality energy density. 2) Strictly control and real-time monitor the lamp inputA)keep flash pulse accuracy and give a real-time monitoringB)Each energy step is controlled and real-time monitored3)Improve the cooling ability of the tip. Crystal of the spot could reach even -18 in 5 minutes. The potential skin thermal hazard is reduced a lot. And less pain feeling because enough low touch-temperature.3、Easily operation1)More intelligent systemOnce start machine, the intelligent system will auto check all key specification and even auto lighten the lamp. Auto damaged parts could be recognized clearly by sensors system optimization. Make a great convenience in trouble shooting.2)More ergonormic design of handpieceAfter studying of Japanese epilation chains saloon,we optimized the handle to suit for each parts of body. It makes convenience for beautician operation and give more satisfy.3)More intelligent IPL power supplier Adjustment energy level and Frequency is smooth, have no order restriction, and also no need of “shot to the ground” procedure. That  helps to reduce the beautician operation difficulty, improve the customer & beautician experience.4)Automatic sleep and one-key wake mode helps to avoid cold gel curving, reduce operation difficulties.4、High stable system1)Matured industrial chips and components are selected to enhance the stability of control system;2)Matured IPL power supplier and lamp are selected to reduce power supply problem which are often encountered in other system3)Optimize the plug-in&out of the handle; enhance the stability of the plug-in;avoid of the electricity leakage; 4)Many years full experience in IPL circuit design;Unique control system design ensure system stabilityMain Spare Parts :Double handpiece for hair removal/ skin rejuvenationSpot size:50mmX15mm & 50mmX10mm;40mmx8mm;Spectra:420nm/530nm/690nm;warranty:500K shotsConfiguration :1\Imported lamp;2\Imported sapphire with big spot size of 50mm*15mm;3\2000w IPL power supply(max.2400w);4\Strong strcuture with steel frame and ABS outcase;5\Double 120*240 high effeciency radiators with High wind volume fans;6\Energy monitoring&controlling system; auto-self checking system;7\Tip temperature:-18°C~8°C8\Double flux sensors;9\Plug&play handpiece connectors with auto recognize system and shots chips inside;10\ 12 hours non stop workingSpecification :Screen: TFT 10.4" Electricity prevention: 1 class BF typeRated input power supply:AC230V+/- 10%,50Hz+/-1Hz/AC110V+/-10%,60Hz+/- 1HzWorking mode : OPTHandpiece connection: Fast-connectedLight source : Intense pulsed lightCrystal : Imported sapphireOperating mode : HR and FHR; SR and FSRNumber of pulse : 1~6FHR and FSR luminous frequency :1~10Hz,step 1Rated input power : 2500VAContinuous light interval of HR and SR mode : 1~3s+/-10%, step0.5Spectra : 420/490/530/560/610/690nm Spot size : 50mmX15mm; 50mmX10mm IPL energy density : 50j/cm2(max)Net weight : 40kgPhysical Dimension: 550mm*450mm*430mmGross weight : 55.5kgPackage :70cm*64cm*57cm (Aluminum Box)Athmed & Aesmed Photoelectric Technology Co., Ltd. Professional IPL Hair Removal Machine  AM-K3 manufacturers,Quality is Life, Integrity is Fundamental, Efficiency is Key, Sharing is Theme. Athmed & Aesmed have been working hard and are determined to make every entrepreneur of the beauty industry able to purchase high-quality and cost-effective portable beauty equipment.Athmed & Aesmed Professional Professional IPL hair removal machine  AM-K3 manufacturers manufacturers,Athmed&Aesmed employees have monthly skills training in cosmetic equipment operations to consolidate their expertise and how to use the machine for optimal results.
  • Best quality IPL hair removal machine K1-W factory
    Best quality IPL hair removal machine K1-W factory
    Working principleLight-heat effect: Heat energy from intense pulsed light will be transmited through hair body to its bottom. The fast rising high temperature helps to destroy the hair bottom to make hair removal forever.Energy stacking technology , FHR powered by high average power, low fluence ,and high repetition rate , gradually increasing the temperature of hair follicle by stacking the energy.ApplicationFast hair removal , Fast skin Rejuvenation , Pigmentation removal Vascular removal Advantages1. New designed handpiece, with spot size: 50mm*10mm;2. The smallest volume of machine but with powerful energy generating system. Single OPT shot energy can reach 12j/cm2 even at the 5Hz repetition without any stop. 3. Touch LCD screen with 7". Online self checking system to ensure the safety.4.Water cooling + Fans cooling + Semi conductor cooling systems! No need to stop the machine after working for hours. very comfortable customer treatment experience .5. Bigger pump to have bigger water flow and reduce lamp temp more effectively;6. OPT/SHR shot Frequency is 1~5Hz. Shots energy is 50j/cm2(max)7.Imported Xneon lamp with 300,000 effective shots warranty Feature1、More longer life-span of LampThere are 2 ways for extending lamp life:1)Improve the chamber reflectivityAdopting silver for the reflection film because silver have more higher reflectivity than gold at the spectrum of 600-1200nm;Imported lamp installed is more steady and more higher electric-photo conversion rate than than other local ones.2)Improve lamp cooling. In the system water is the first cooling medium of lamp. So the water flow is very important for heat radiation. Now in the market, most of IPL system is less than 2.0L/min, but our SHR is improved to almost 2.5 times. Then the life of lamp is greatly extended. 1.5M shots have been reported by clients (but 300K shots/1 year for warranty).2、More safety1) On SHR mode, energy density which you could select on the screen is calibrated by the imported IPL energy meter. The date is showing the reality energy density. 2) Strictly control and real-time monitor the lamp inputA)keep flash pulse accuracy and give a real-time monitoringB)Each energy step is controlled and real-time monitored3)Improve the cooling ability of the tip. Crystal of the spot could reach even -18 in 5 minutes. The potential skin thermal hazard is reduced a lot. And less pain feeling because enough low touch-temperature.3、Easily operation1)More intelligent systemOnce start machine, the intelligent system will auto check all key specification and even auto lighten the lamp. Auto damaged parts could be recognized clearly by sensors system optimization. Make a great convenience in trouble shooting.2)More ergonormic design of handpieceAfter studying of Japanese epilation chains saloon,we optimized the handle to suit for each parts of body. It makes convenience for beautician operation and give more satisfy.3)More intelligent IPL power supplier Adjustment energy level and Frequency is smooth, have no order restriction, and also no need of “shot to the ground” procedure. That  helps to reduce the beautician operation difficulty, improve the customer & beautician experience.4)Automatic sleep and one-key wake mode helps to avoid cold gel curving, reduce operation difficulties.4、High stable system1)Matured industrial chips and components are selected to enhance the stability of control system;2)Matured IPL power supplier and lamp are selected to reduce power supply problem which are often encountered in other system3)Optimize the plug-in&out of the handle; enhance the stability of the plug-in;avoid of the electricity leakage; 4)Many years full experience in IPL circuit design;Unique control system design ensure system stabilityMain Spare Partshandpiece for hair removal/rejuvenationSpot size:50mmX10mm; 50mmX15mm for optional;Spectra: 530nm/690nmwarranty: 300K shots.SpecificationScreen: TFT 7"Electricity prevention: 1 class BF typeRated input power supply:AC230V+/-10%,50Hz+/-1Hz/AC110V+/-10%,60Hz+/-1HzWorking mode : OPTHandpiece connection: Fast-connectedLight source : Intense pulsed lightCrystal : Imported sapphireSpectra : 420/490/530/560/610/690nmSpot size : 50mm*10mm; 50mm*15mm(Optional)IPL energy density : 50j/cm2(max)FHR and FSR luminous frequency :1—5Hz,step 1Rated input power : 2500VAContinuous light interval of HR and SR mode : 1~3s+/-10%, step0.5Net weight : 18kgGross weight : 20kgPhysical dimension:430mm*260mm*280mmPackage:58cm*50cm*47cm(Carton Box)Athmed & Aesmed Photoelectric Technology Co., Ltd. BestQuality IPL Hair Removal Machine K1-W Factory,Replace the new machine - If within 30 days of receiving the goods (* Take the date of receipt of the goods logistics as the actual date of receipt), it is found that the machine is not working properly (except for non-human or other malicious acts), we replace the new machine for free.
  • Professional IPL hair removal machine K1-B manufacturers
    Professional IPL hair removal machine K1-B manufacturers
    Working principleLight-heat effect: Heat energy from intense pulsed light will be transmited through hair body to its bottom. The fast rising high temperature helps to destroy the hair bottom to make hair removal forever.Energy stacking technology , FHR powered by high average power, low fluence ,and high repetition rate , gradually increasing the temperature of hair follicle by stacking the energy .ApplicationFast hair removal , Fast skin Rejuvenation , Pigmentation removal Vascular removal Advantages1. New designed handpiece, with spot size: 50mm*10mm;2. The smallest volume of machine but with powerful energy generating system. Single OPT shot energy can reach 12j/cm2 even at the 5Hz repetition without any stop. 3. Touch LCD screen with 7". Online self checking system to ensure the safety.4.Water cooling + Fans cooling + Semi conductor cooling systems! No need to stop the machine after working for hours. very comfortable customer treatment experience .5. Bigger pump to have bigger water flow and reduce lamp temp more effectively;6. OPT/SHR shot Frequency is 1~5Hz. Shots energy is 50j/cm2(max)7.Imported Xneon lamp with 300,000 effective shots warranty SpecificationScreen: TFT 7"Electricity prevention: 1 class BF typeRated input power supply:AC230V+/-10%,50Hz+/-1Hz/AC110V+/-10%,60Hz+/-1HzWorking mode : OPTHandpiece connection: Fast-connectedLight source : Intense pulsed lightCrystal : Imported sapphireSpectra : 420/490/530/560/610/690nmSpot size : 50mm*10mm; 50mm*15mm(Optional)IPL energy density : 50j/cm2(max)FHR and FSR luminous frequency :1—5Hz,step 1Rated input power : 2500VAContinuous light interval of HR and SR mode : 1~3s+/-10%, step0.5Net weight : 18kgGross weight : 20kgPhysical dimension:430mm*260mm*280mmPackage:58cm*50cm*47cm(Carton Box)Athmed & Aesmed Photoelectric Technology Co., Ltd. Professional IPL Hair Removal Machine K1-B manufacturers,Quality is Life, Integrity is Fundamental, Efficiency is Key, Sharing is Theme. Athmed & Aesmed have been working hard and are determined to make every entrepreneur of the beauty industry able to purchase high-quality and cost-effective portable beauty equipment.
  • Aesmed Athmed Infrared laser can reduce skin impedance and RF energy X9
    Aesmed Athmed Infrared laser can reduce skin impedance and RF energy X9
    Aesmed Athmed Infrared laser can reduce skin impedance and RF energy X9
  • Professional AM V8-1 manufacturers
    Professional AM V8-1 manufacturers
    Athmed & Aesmed Professional AM V8-1 manufacturers,This machine has combined with the RF, vacuum, outer automatic roller, infrared light, cavitation, BIO, lipo laser. It is the new updates of V9 Vacuum cavitation technology. It also combines with RF and photons (red) to generate heat. It can penetrate the skin to a depth of 15mm by mechanical movement, which is far more than the depth of the other devices currently on the market. While the heat is conducted, the mechanical movement is carried out simultaneously and so is the fat. 
  • Athmed Aesmed 808nm laser hair removal apparatus
    Athmed Aesmed 808nm laser hair removal apparatus
    Athmed Aesmed 808nm laser hair removal apparatus
  • Best 4D 2 in 1 Hifu Lift and tighten facial skin and remove skin wrinkles Supplier
    Best 4D 2 in 1 Hifu Lift and tighten facial skin and remove skin wrinkles Supplier
    Radar engraving is the use of mechanical radar waves for good tissue penetration, accurately transferring 65 to 72 degrees of thermal energy to the skin's SMAS layer, 1.5 epidermis, 3.0 dermis, 4.5 fascia, 4.5 collagen (other A), 13 fat layer, 8.0 shape, produce heat coagulation, shrink skin, regenerate collagen. In addition, radar can be carved through the fat layer (depth 8mm ~ 13mm) for body treatment of obesity and chest.A variety of treatment heads effectively stimulate fibroblasts to split new cells at 40 times per second, dissolve facial fat cells, tighten skin contours, repair damaged fibrous tissue, stimulate collagen cell regeneration, and quickly achieve the effect of thin face and tight Q-bomb. At the same time, the precise positioning of the radar wave can actively identify the fat cells, and reach the depth of the target through a unique probe friction treatment/treatment, so that the patient does not feel pain.
  • Best Three-wavelength laser hair removal factory direct sales AM-F9 Factory Price
    Best Three-wavelength laser hair removal factory direct sales AM-F9 Factory Price
    The machine use three wavelengths bars (755nm, 808nm, 1064nm) assembled inside one handle, a light capable of emitting three wavelengths of light, to achieve different skin depths. So achieve more thorough hair removal.The combination of 3 different wavelengths enables practitioners to achieve better efficacy and highest coverage by simultaneously reaching different anatomical depths. This is the first time such a comprehensive treatment can be performed with just a single applicator.
  • Customized hair removal machine K1-G manufacturers from China
    Customized hair removal machine K1-G manufacturers from China
    SpecificationScreen: TFT 7"Electricity prevention: 1 class BF typeRated input power supply:AC230V+/-10%,50Hz+/-1Hz/AC110V+/-10%,60Hz+/-1HzWorking mode : OPTHandpiece connection: Fast-connectedLight source : Intense pulsed lightCrystal : Imported sapphireSpectra : 420/490/530/560/610/690nmSpot size : 50mm*10mm; 50mm*15mm(Optional)IPL energy density : 50j/cm2(max)FHR and FSR luminous frequency :1—5Hz,step 1Rated input power : 2500VAContinuous light interval of HR and SR mode : 1~3s+/-10%, step0.5Gross weight : 20kgPackage:58cm*50cm*47cm(Carton Box)Athmed & Aesmed Photoelectric Technology Co., Ltd. Customized Hair removal machine K1-G manufacturers FromChina,First heating for three minutes can make the blood circulation in the treatment area better to achieve the best treatment effect.
Contact Us

If You Have More Questions, Write To Us